Helmet Charger Battery Holder for GoPro mounts.
Description
Tired of that GoPro dying and not catching that sweet foot drag or landing? Me too (well not the sweet foot drag part). I designed this battery holder to use the pile of GoPro mounts I had laying around so that on the days I didn't use the battery, I could just snap it off. It's designed to print in two parts since the parts have different printing orientations for strength. A little light sanding and some CA glue and the bond is super strong. Printed in strong PETG with no supports needed. Hardware needed: M3 x 10 cap head screw and M3 hex nut. Tip: The nut socket is a little undersized so you can lightly heat a soldering iron, place the nut on the tip and press into place for a strong hold. Battery: Anker PowerCore+ Mini, 3350mAh Lipstick-Sized Portable Charger found on Amazon at https://www.amazon.com/Anker-PowerCore-Lipstick-Sized-Generation-Batteries/dp/B005X1Y7I2 -or- any round battery with a diameter of around 23mm.
Statistics
Likes
10
Downloads
0