Ubiquiti NanoHD Stand
Description
The mounting plate was designed from scratch in Tinkercad to adapt to the NanoHD model. Screw the bracket provided with the antenna to the mounting plate. A small triangle indicates the correct orientation. Then remove the cable feed plug from the antenna, plug in the cable and then lock the antenna to the mounting plate as shown by the NanoHD quick start guide. Slid the base into the notches located on the back of the mounting plate. I suggest adding some glue to ensure the top doesn't accidentally fall off while moving it. The mounting plate surface is a bit rough. Suggestions on how to make it smoother in Tinkercad are very welcome. You can find the model here: https://www.tinkercad.com/things/1uyHmIDAhUO-ubiquiti-nanohd-mounting-plate I printed it in white PLA, 200°C, 20% infill.
Statistics
Likes
45
Downloads
0