FilaSpoolCase
Description
::UPDATE:: Added version Z that does not require a spool core (typically comes with Geeetech / Creality printers). ::UPDATE:: Added an adaptor for M6 pushfits - for use with ptfe tube | PC4-M6 for 4mm OD tubing / 1.75mm filament | PC6-M6 for 6mm OD tubing / 3mm filament Note: I find the unthreaded one works better ::UPDATE:: Now snap-able and one size fits all! (fits either 1.75 or 3mm filament) Simplified silica packet compartment and core, and thinned down the base for easier and quicker printing https://www.youtube.com/watch?v=VBI2WA4y6lE The snap-fit pegs are 4mm in diameter Part A comes in 3 different snap-fit hole sizes - the number at the end of the file name corresponds to offset radius: filaspoolcase-X-A-0.05.stl = 0.05mm filaspoolcase-X-A-0.1.stl = 0.1mm filaspoolcase-X-A-0.2.stl = 0.2mm actual hole size = 4mm + 2 x offset radius Use this fit test to determine which one will work best for you: https://www.thingiverse.com/thing:3513594 - So if your peg fits, let's say, hole size 4.1 (diameter), then you'd need to print part A size 0.05 (radius) Print without support I used an Anycubic Chiron (400x400x450) Suggestion: tape the seam up with masking tape
Statistics
Likes
30
Downloads
0