EUCGUY: Custom headlight solution. GW Monster/MSX
Description
Designed by EUCGUY" Now a version 2. after testing - Tighter fit - Beam higher up - Better finish Replace the stock headlight provided by Gotway, with item listed under, print my cap and press into place with a drop of glue. How to install new light? 1) See photos above, then read text under. When old headlight is removed, the new light should be installed like this. Lens glued to the outside with the flat surface towards the wheel. Heatsink with led chip from the opposite side, fits perfectly into the hole at 45 degrees rotation. "see photo above" 2) To take the bicycle light apart. Remove read screws. "2 in total" Unscrew "orange" cap around lens. The rest is obvious. Bicycle light - Item number 312248334095 Link under https://www.ebay.com/itm/Rechargeable-15000LM-XM-L-T6-LED-MTB-Bicycle-Light-Bike-Front-Headlight-w-USB-CZ/312248334095?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20190212102350%26meid%3Dc9d67f7391f9421192aeae37a84dd459%26pid%3D100012%26rk%3D2%26rkt%3D12%26mehot%3Dpp%26sd%3D123517065397%26itm%3D312248334095&_trksid=p2047675.c100012.m1985
Statistics
Likes
8
Downloads
0