Monoprice Mini V2 and V1 - MKS Gen L and TFT24 touchscreen MODS
Description
<H1>This is a work in progress (V1 untested)</H1> <p><B>15-April-2019</B> Corrected some missing levels icons of the TFT and added an emergency Stop in the custom menu to use when working with Octoprint. </p> <p><B>3-April-2019</B> Move the MKS Main Board up to 4.2mm so that some boards with longer legs below the power connectors clears the support base. </p> <p><B>20-March-2019</B> Remove the vent inlet on the V1 side panel, made a left side panel for the vent inlet to improve airflow. </p> <p>Removed 0.3mm version of the slip parts, since it's intended for printing on the mini, 0.4mm is mandatory. </p> <BR> <p><B>19-March-2019</B> Added 0.3mm and 0.4mm gaps versions, I found that printing on the mini 0.3mm was too tight so I added the 0.4mm, rename the others 0.3mm. </p> <p>Also added a version for the Mini V1 with space for a 40x10mm fan and the bed wires mod as requested, it is not tested. </p> <p>Modified the MKS base plate bracket so that all main boards version fit (not tested). </p> <BR> <p><B>17-March-2019 Noon</B> Modified MKS Gen L to have room for the USB connector and some tweaks Sidepanel and the retaining wall on the MKS. </p> <p>Added Marlin 1.1.9 and Touchscreen Files that works as of right now. Instructions on how to install them in a future video on my Youtube channel, I add them in advance for those who wants to experiment on their own. </p> <BR> <p><B>17-March-2019 Morning</B> Moved the USB connector on the side panel 1.5mm up, it was bending the bottom plate... </p> <BR> <p><B>17-March-2019</B> Added to new MKS GEN Bracket that will support the new side panel USB Type-B connector. Also added the side panel with and without a bed wire passtrough. </p> <BR> <p>I am installing an MKS Gen L motherboard and TFT24 touchscreen on my Monoprice Mini V2, with a full Marlin 1.1.9 and Linear Advance. </p> <p>I am documenting everything on my youtube channel <a href="https://www.youtube.com/playlist?list=PLMxAz7x1vIz2pMbjao8xxccaulJRSKWYR"> Monoprice Mini V2 Mod Playlist</a>.</p> I am making this available ahead of the videos to give time to print those. You have split versions of the Faceplate and MKS Gen L support brackets that can be print with the Mini. And full version for bigger printers. Make sure you first layer is not too much squished down.
Statistics
Likes
52
Downloads
0