Creality Ender 3 X Axis Linear Rail Mod
Description
## Linear Rail. ### X Linear Rail Mod. ---------------------------------------- [Bobblejot Website](http://bobblejot.com) [Bobblejot GitHub](https://github.com/Bobblejot/) [Bobblejot Twitter](https://twitter.com/bobblejot) [Bobblejot Patreon](https://www.patreon.com/join/bobblejot?) ---------------------------------------- ** note ** Have now eventually got around to uploading a version for the MGN12H rail as well, apologies to anyone that was waiting for the long delay. The new MGN12H version and the Updated MGN9H version now use a seperate standoff for the hotend to make print orientation easier. The MGN12H Mod adds an additional 3.5mm to the Y Offset on top of the Original 7mm Offset. ---------------------------------------- Just a very simple X Linear rail mod using an MGN9H rail, Y offset is increased slightly due to the rail carriage but it isn’t by much just 7mm. You will need to file or grind a small bit of material away from the Extruder cover mounting lug where it catches the bottom M3x6mm mounting bolt. I bought a longer rail 330mm because i don't use the endstops, most suppliers will cut to any length you need though. You don’t need any additional hardware other than the rail itself and a few M3 T-Nuts and some Bolts: [Alignment Jigs and Drill Guides](https://www.thingiverse.com/thing:3533580) ---------------------------------------- ** Materials: ** [1 x 320mm long MGN9H Linear Rail - Aliexpress](http://s.click.aliexpress.com/e/Upk6V88) or [1 x 320mm long MGN12H Linear Rail - Aliexpress](http://s.click.aliexpress.com/e/Upk6V88) [8 x M3 T-Nuts - Aliexpress](http://s.click.aliexpress.com/e/cFd9FgFI88) 12 x M3x6mm Cap Head Bolts 2 x M3x25mm Cap Head Bolts 3 x M3 Locknut 1 x M3 Washer And That’s it. ---------------------------------------- ** My Other Ender 3 Parts: ** [Direct drive BMG + E3D Volcano](https://www.thingiverse.com/thing:3835332) [Tusk Fan Shroud](https://www.thingiverse.com/thing:3055926) [Z Endstop Bracket](https://www.thingiverse.com/thing:3057136) [Y Endstop Bracket](https://www.thingiverse.com/thing:3057132) [Cable Guide](https://www.thingiverse.com/thing:3061903) [Bondtech Style Extruder](https://www.thingiverse.com/thing:3016298) [Bondtech BMG Mount](https://www.thingiverse.com/thing:3489669) [Bondtech BMG Style Extruder](https://www.thingiverse.com/thing:3263791) [M8 Level Probe Mount](https://www.thingiverse.com/thing:3491181) [Y Axis Linear Rail Mod.](https://www.thingiverse.com/thing:3064275) [Y Axis Linear Rail Mod v2.](https://www.thingiverse.com/thing::3530419) And That’s it. Enjoy :-)
Statistics
Likes
330
Downloads
0