Printing Terminal for 7inch Raspberry Display with USB
Description
Printing should not be a problem ;) - for usb i used cables like the one on the picture, just cut the males of and solder it directly to your raspberry pi. You will find the cables on amazon or banggood. - for mounting the case to the middle part i used screws which where also used to mount fans in a PC (Computer Cooling Fan Mount Screws). Same for the Backplate. You'll find them also an amazon - i used 30x30mm 5v fans - for mounting the base to the middle part you can use screws with 3mm diameter and 20mm length - in the base you can mount iron plates to weight it down -- plate size 80x60mm -- holes for plates 68x51mm and 3,5mm use also 3mm screws - to prevent the stand from sliping around, i used a 1,5mm mat which is also used in trunk of cars. Use a spray glue to fix it ;) any questions? Just ask ;) **edit 22.03.19:** add stl for display case (inspired by **[luc_e](https://www.thingiverse.com/thing:1585924))** find me on instagram **dev_printer**
Statistics
Likes
29
Downloads
0