Olive Jar Terrarium
Description
This is a plinth to hold a recycled olive jar and an orphaned glass to create a decorative miniature terrarium. Something to brighten up my Dilbert cube. The plinth is designed to screw onto a very large olive/pickle jar with a 102mm lid. Thus making it safe to pick up the jar and glass as a single item. I had two different mismatched glasses. So I designed a base section that does not have a glass holder. Then I imported the base into the two different glass holder designs. i.e. - OliveJarTerrariumBase.scad has no glass holder. - OliveJarTerrarium80mmGlass.scad imports OliveJarTerrariumBase.scad - OliveJarTerrarium68mmGlass.scad import OliveJarTerrariumBase.scad Note: You will need to change the import path to the full file path of OliveJarTerrariumBase.scad I've supplied all the OpenSCAD files so you can adjust your glass holder to suite your own glass size. If you happen to have a glass of similar size, just print the STL. Or, you can just print the base STL and have no glass holder. Note that the 68mm glass holder is tapered. Whilst I printed my plinth in PLA at 0.2mm, the design is simple enough that it should work with most filament types.
Statistics
Likes
88
Downloads
0