New Era 59FIFTY
Description
Multi material New Era 59FIFTY Logo ATTENTION: all files have been flipped back to front, so i could have a gloss/glass front finish. 3 print jobs using 1 nozzle 1st print SMALL BLACK TEXT file, 2nd then print BLACK file. 3rd print the GOLD file. (infill) ( i always tend to print the infill file last, this helps just incase one of the previous print has an error, at least then you can stop the print, remove failed print, and then reprint the failed print, (the GOLD infill print, helps bond all the other prints to gether, Completed print measures around 195mm (round) x 0.6mm (thick) i print 1st file, once print has finished, select to preheat your printer (keep nozzle and bed hot) Do not remove 1st print from bed, as second print will print around the first. AS LONG AS YOU HAVE GOOD BED ADHESION! i DO NOT use anything to to adhere to the bed, NO TAPE, NO GLUE, NO HAIRSPRAY!! i only remove my glass before printing, and wash with hot soapy water, rinsing thourghly! and drying with paper towels, Also, be careful not to touch the print area of your glass before placing back to printer or you WILL have to start again. Settings: NO BED ADHESION ( this is very important! ) nozzle temp : 190-205 (depending on how cold my print room is) bed temp : 70 0.2mm layer 100% infill 102.5 flow 40mms speed retraction : YES Z hop : YES 2mm Ironing : YES I have used Photoshop, TinkerCad, and Cura as my slicer. i will include the gcode files, which have already been alined with each other, and includes all my current settings. PLEASE BE CAREFUL IF YOU USE MY GCODE files, as my print bed is 200mm sq, and this print is extremly close to the right hand edge. any issues, or you are happy with your print, please leave a comment :) Happy printing folks :)
Statistics
Likes
3
Downloads
0