Screwless Top Corners Ikea Lack Enclosure
Description
1. Print the files. 2. Drill a 5mm hole in every leg on the not drilled side. The hole will not be centered in the middle! 3. Screw the orignal 7mm screw of the Ikea Lack table threw the printed part into the drilled hole, it will tighten on half the length. You can use pliers or a clamp to tighten it. 4. Screw the leg with the printed part as you usually would into the table top. 5. ... 6. ... 7. ... 8. SUCCESS
Statistics
Likes
5
Downloads
0