Tablet Mount Kit
Description
Tablet Mount Kit ============= Easy to print kit to mount your tablet. Support tablets that have topmost 9mm thickness, width or height doesn't matter. If tablet is used vertically, tablet minimum width is 16cm. **Models optimised for:** * Extrusion width: 0.2075mm, 0.415mm, or 0.83mm * Layer height: 0.16mm, 0.32mm, or 0.64mm * Support: not needed (however if you have adhesion troubles with wall mount pieces, you might want to flip them over and try to print flat with all supports enabled) Models description =============== **Tablet Mount Kit - All.stl** All pieces in one print. Requires 170x108x80mm print area. **Tablet Mount Kit - Quick Wall Mount.stl** Piece to quickly mount your tablet on vertical surfaces. Contains large backing so you can just attach pieces on your tablet, put two-sided tape on both pieces and press the prints against vertical surface. Print two (same piece will fit on left and on right). **Tablet Mount Kit - Table Stand Left.stl** **Tablet Mount Kit - Table Stand Right.stl** Piece that place your tablet on 22,5 degrees view angle and keep tablet standing still on table. Left and Right have own pieces. **Tablet Mount Kit - Wall Mount.stl** Piece to mount your tablet on vertical surfaces using screws. Print two (same piece will fit on left and on right)
Statistics
Likes
5
Downloads
0