Flight simulator cockpit gear lever
Description
This is inspired by Zenon's https://www.thingiverse.com/thing:3082051 . I moved the spring inside the lever and designed for endstop switches. Additional parts needed: 2 micro switches with roller lever, e.g. Omrom SS-5GL2 screws and nuts to fix micro switches, I used 4x M2x10 1 screw M3x20 1 screw M2.5x15 or longer with countersink head 2 washers, 6mm diameter 75mm piece of 3mm diameter spring, 0.4mm wire. If printing the pegs on the lever gives you troube, you can use the alternate lever design with holes instead and insert M3 set screws instead.
Statistics
Likes
15
Downloads
0