Pro DnD Case V7
Description
ITS BIGGER, IT HOLDS MORE DICE, ITS VERSION 7!!! This Version Mods...! - Holds 8 sets of 7 dice Comfortably!!! (cause we need more dice dammit!) - Holds 4 Mins (25.4mm bases)!!! - The Pencil area has been moved to a slide draw with magnets to the side of the box!!! - The Tablet Stand has a Attachment for a portable Battery Charger!!! Machine and Printing Settings: Machine: Cocoon Create Touch (Wanhao I3 Plus) - 200x200x180mm (you will need a bed of at least 200X200mm to print this!!!) Amount of Plastic used: 75 - 80% of a 1KG roll of PLA (including support material) Nozzle: 0.4mm @ 195C Layer Height: 0.2mm Bed: 60C - for the larger prints, A thin layer UHU glue stick helps! Speed: 50-55mm/s Infill: 15% - if you go lower in %, (eg 10%) you will need to increase top layers to 5 to remove Bumps. on the slide lid, 100% infill is best! Walls: Top 4 to 5 - Depending on your infill! above 20% around 3-4 is fine! Walls; Bottom - 2 to 3 layers. Walls: Sides - i used 2 on mine.... Ive had no issues for 3 weeks now! 3 would be ok, 4 is wasting time printing and plastic. Material: PLA is fine. ABS if your more daring! lol The Tablet Stand was Slightly edited in Tinkercad to put holes in the back for the magnets (Original Stand Design - https://www.thingiverse.com/thing:1769212) Thanks to https://www.thingiverse.com/jamesarm97/ for the Tablet Stand Design!!! You will need 20 1X3mm Magnets for this build - Cheap of Ebay! - - - NOTE: THIS IS A COPYRIGHT FREE DESIGN!!! - - - MEANING: YOU CAN MAKE, MODIFY AND SELL WITHOUT INFRINGEMENT!!! Happy Gaming - Berko This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8T0TEk0B32e
Statistics
Likes
58
Downloads
0