Awesome Face with Shades (3 sizes)
Description
This was one of the first things I modelled in Fusion 360. I love this emoji and I wanted to make one to hang up in my car. I ended up making three sizes: <ul> <li>Small: 40mm diameter. Mounting tab with 1.5mm radius semicircular hole. Max. thickness 4mm (single sided) / 4.4mm (double-sided).</li> <li>Medium: 65mm diameter. Mounting tab with 2mm radius semicircular hole. Max. thickness 4mm (single sided) / 6mm (double-sided).</li> <li>Large: 100mm diameter. Mounting tab with 3.5mm radius semicircular hole. Max. thickness 5mm (single sided) / 8mm (double-sided).</li> </ul> For reference, the one hanging from my rear-view mirror in the picture is the medium double-sided. I found printing the double-sided faces in two halves easiest: place two instances of the model on the bed, one flipped, and then drop them into the bed in Cura (or other software), by half of the thickness. I superglued the halves together after painting the faces, then painted the edge after the glue had dried.
Statistics
Likes
14
Downloads
0