E3D V6 Bowden Carriage
Description
An x-axis carriage for an E3D V6 bowden setup. It has mounts for the original fan from the Anet A8 and a Bltouch probe. For the assembly you will need: 12x M4x8 raised countersunk screws for the carriage itself 2x M3x14 cylinder head screws for the v6 holder 2x M3x18 cylinder head screws for the beltholder 2x M3x10 raised countersunk screws for the fan mount 2x M3x8 raised countersunk screws for the bltouch mount 2x M3 screws with nuts to fix the bltouch to the mount 2x M3 screws with nuts to attach the fan to the holder You can screw the bolts in the holes without counter nuts but i recommend drilling these holes out with a 2.5mm drill bit so that you won't destroy the part. Here is the position for the Bltouch: #define X_PROBE_OFFSET_FROM_EXTRUDER 37 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 #define Z_PROBE_OFFSET_FROM_EXTRUDER 2.5 If i forgot something ask me.
Statistics
Likes
10
Downloads
0