Anet A8 remixed Extruder Holder
Description
UPDATE PLEASE USE FILES V5. Ive just updated these so they fit together better and nuts are easier to insert. Hopefully this will be the last update. Wanted a new extruder for my A8, Still learning how to use fusion 360, so thought a good place to start would be to mix up a few files and see where i end up. A couple of the parts ive uploaded twice, there is a subtle difference between them, hopefully the file names will make sense. Just a side note the holes are roughly 3mm in size. I deliberately do the holes smaller than required as I never know what size bolts I want to use, normally its whatever ive got in my nuts and bolts tub. What I do is drill the holes to the diameter of the bolts im using. Ive yet to work out the offset for this design, looking at the printer its roughly 10-15 mm to the right when printing. not figured out how to change this in Marlin yet. Next project i want to add a plate that holds the cr10 square extruder. that way if one nozzle clogs i can swap out and worry about it later. Feel free to modify it, share etc let me know if you modify it, be nice to see other peoples take on this design.
Statistics
Likes
9
Downloads
0