608 Bearing Replacement (print in place/fully printable)
Description
Try this before you print the bearing- https://www.thingiverse.com/thing:3569489 608 bearing dimensions but in 3D print style (wont lock up) ;D Takes 20 minutes on my delta printer :D 22mm outer 8mm inner 7mm width IF YOU HAVE PROBLEMS WITH STICKING BEARINGS TRY THE "ULTRA EASY 608" or the "EASY PRINT 608." On a side note, you can lower your extrusion rate by 1-2% depending on your results. Or if your bearings fall out when you take it off the bed, increase your extrusion rate ;D Also could try this 2 minute print first to verify your printer- https://www.thingiverse.com/thing:3555815 Make sure you follow the directions in the second video. Its rough in the beginning but if you work with it a little it spins even without any lube ;)))) If you absolutely hate the logo i made one without. Check my page :) UPDATE 1: I added a rod .stl to help with the smoothing process ;) UPDATE 2: Added Beveled.stl style for easier entry into parts. UPDATE 3: Added a beveled 8.1mm and 8.2mm bore version for easy fit and printer tolerance levels. (JUST FYI, the beveled ones are harder to loosen) UPDATE 4: Added Beveled 608’s with 8mm, 8.1mm and 8.2mm bore with 1.2mm spacer variants. UPDATE 5: Added a 2 in 1 608 for science. This is expirimental. 22mm outer, 8mm inner, 14mm width. UPDATE 6: Added Drill Bit Tool (keep in mind heat will cause pla to fuse so don't overdo it :D) and an easier print 608 (functional, checked twice) UPDATE 7: ULTRA EASY 608 Used in Helical Gear Cups- https://youtu.be/iNzo9rq7fnw Proof of Concept- https://youtu.be/PBQwdsKLIos In depth tutorial- https://youtu.be/DqDdznp2iDY First release- https://youtu.be/nRrHrB6gaoE https://youtu.be/wwlw3RK31zY If I’ve made a positive impact in your life please support me via Paypal ;) https://paypal.me/drewbrewchan?locale.x=en_US
Statistics
Likes
596
Downloads
0