RepRap Smart Display Controller Stand
Description
APOLOGIES.... Turns out the source model for the 12864 display was garbage. A redesign with a more accurate source model is incoming. V2 IS NOW UPLOADED. Please be aware that I'm working from imported models of the screen. To the best of my ability I verify them, but unfortunately not everything on the internet is correct! A first draft stand for the ReprRap smart display/controller. Requires 4x M3 x 8mm, and 4x M3 x 16mm socket heat bolts. The parts are already oriented for printing. Only the main body will require supports in the window, unless your printer is really good with bridging! 22-3-19: Cutaway to clear the board solder connections below the screen added to the Main Body.
Statistics
Likes
68
Downloads
0