Robo C2 Glass Clips
Description
I finally ran out of Robo3D's bed adhesion tape so I ordered a piece of Borosilicate glass from Amazon and designed these clips to hold the glass in place. Works great and holds it well. The one I order is listed below. It has a 130x130x3 mm footprint. https://www.amazon.com/gp/product/B01LX3CS6Y/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=lyfewiconsul-20&linkId=10381b73d6e10f3c63caeb5dcdc5b7de&language=en_US P.s. I printed the 4 clips with PLA but it's probably preferrable to print it in ABS or something more flexible if you're able to. Also, due to the print bed being a detachable two piece design, it doesn't work too well with having clips attached to the plastic piece of the bed so I used 4 #8 nuts as spaces on the underside of the plastic piece of the build plate and hot glue them in place. It gave me a little bit more clearance to attach the clips.
Statistics
Likes
6
Downloads
0