Prusa MK3 / MK3S Filament Guide
Description
A filament guide made to be used with a tube that goes to the extruder of the Prusa. This will avoid pulling directly to the spool moving the stress from the extruder to the frame. For optimal result, the tube must go through the hole. A spot of superglu will then keep it in place if it's a bit loose. If your tube diameter is bigger, you can modify the piece. The STL is available on the archive, if you need to modify it, you can get the original file from this link : https://a360.co/2TSaKFr
Statistics
Likes
83
Downloads
0