KT-LCD3 mount for 31.8mm handlebar
Description
Made this handlebar mount for a KT-LCD3 for mounting it forward of the handlebar. It's made for a 31.8 mm mountain bike handlebar. Basically insert the left and right from the smaller/thinner part of the handlebar and move towards the center, then mount the LCD from the 2 holes. I used a couple of m4 8mm long hex screws on the LCD and some m4 20mm hex screws & nuts for securing to the bar. I also included the controller mount for the Radrover 35A controller upgrade kit from Bolton ebikes, which included the KT-LCD3. Printed in ABS at .2mm & 60% infill. No support but printed with a brim.
Statistics
Likes
7
Downloads
0