Get Shifty Box REMIX
Description
As i needet this to fit on a bigger table i changed the distance between the clips to 6cm (2,3622 inch). And in addition to that i also modified the stick and knob so that i can light it up a bit. i used a WS2812b digital LED which lights up green and when a button is pushed it blinkes red. Also if not used for a while it will go through a rainbow routine. The wires for the LED run through the stick. Use a transparrent filament for the knobV2_top (i used 5% infill) <h3>Only thinges needed in addition to the original:</h3> <ul> <li>3 x M3x30 Bolts</li> <li>3 x M3 Nuts</li> <li>1 x M8x50 Bolt</li> <li>1 x Digital LED</li> <li>some wires</li> <li>and if you want to diable the LED a switch. Just drilll a hole if you need.</li> </ul> <b>Libraries needed for the code to run: Joystick and FastLED</b> <b>If you dont need the led use GetShifty-WO-LED.ino</b>
Statistics
Likes
1
Downloads
0