Customizable Prusa MK3 Y-axis Bearing Holder

Description

Thanks to inks007 for this well made design. I did have some issues with the design: When I installed the y-axis on my new MK3s I noticed that it rubbed against the frame. Picture of it is attached. After learning how OpenSCAD works, I figured out how to adjust the design accordingly. Now the remixed version won't rub against the frame anymore. Everyone should just need to adjust this one parameter: bearing_od_loosen -> adjust it according to the bearing, printer settings and filament material What you need for this design: 6x M3 16mm-18mm screws. (Use washers with the 18mm long screws otherwise they will hit the frame) 6x M3 nuts

Statistics

Category

Tags