Sailor Moon Crystal Prism Wand Lamp
Description
this is a remix of the Sailor moon crescent healing wand cosplay prop as a freestanding standing lamp. i replaced the original jewel part with the high detail Moon lamp model and modeled a 2 piece base to support the lamp. it uses a 500mA 12V supply and a 12v led desk lamp bulb trapped permanently inside the Moon, placed there just before the top closed in. if you used a thinner bulb than i did it could be inserted through the base of the moon piece instead of having to drop it in during print(i ruined 3 prints before i managed to do the drop in without mesing up) use this type of bulb [Amazon link](https://www.amazon.com/GRV-Wedge-25-3528-Super-Bright/dp/B00EDFM83A/ref=sr_1_37?keywords=12v+led+bulb&qid=1553632793&s=gateway&sr=8-37). and remove the plastic bit on the leads to reduce height and overall space required. it's a fairly tight fit in there and you don't want any wasted space. this isn't the exact bulb i bought, i got mine in a walmart in the lighting section, it's a 12v led bulb for halogen desk lamps. you'll also want a toggle switch with an overall height less than 40mm and that will fit in the 6.2mm hole provided.
Statistics
Likes
59
Downloads
0