Piper 2 - Gantry Cable Chain
Description
Wanted a clean way to route the gantry wiring of a Piper 2 printer. Cable chain is raised to be 5mm above the highest point of the gantry. Both Extruder and Gantry ends allow for bi-directional swinging so routed cables won't get into too tight of an arch when head is at max X/Y position. Links are designed to be open for easy access to wiring Clips pop in and keep the wires in place. My bed size is 300mm x 300mm and I used 38 cable_chain_link parts and 38 cable_chain_clips.
Statistics
Likes
9
Downloads
0