NEMA 17 Stepper Mount for 1/2" EMT
Description
This is a NEMA 17 Stepper Motor mount sized for U.S. 1/2" EMT Tubing. I designed this for a Piper 2 CoreXY Extruder of my own design: Belted Extruder v1 - https://www.thingiverse.com/thing:3289589 Belted Extruder v2 - https://www.thingiverse.com/thing:3384722 Photo's are of mounted Belted Extruder v2 design. The mount design is long enough for a 48mm long stepper body such as the Zyltech 17HD48002H-22B Stepper: http://www.zyltech.com/nema-17-stepper-motor-1-7-a-0-59-nm-84-ozin-1-3-or-5-pack/ however it should fit any NEMA 17 just fine. Use four #6-32 x 3/4" long machine screws and nuts to fasten around 1/2" EMT tubing. Screws can be fastened though mount or mount2 parts depending if you secure to stepper or EMT tubing first.
Statistics
Likes
5
Downloads
0