Modular Mosquito Hotend Mount for creality CR-10/Ender_3
Description
Modular mounting solution for Slice Engineering Mosquito Hotend. Mount places nozzle in the stock location on the Creality carriage using original hardware. A 3rd mounting hole is added below if additional stability is preferred. However, mount is perfectly stable without it. Mount also adds location for BL touch in line with the nozzle. BL touch mounts perfectly with Provided adjustment springs, however I just use about 2-3mm worth of M3 washers to shim it down to a reasonable height and adjust z offset accordingly in the firmware. Nozzle offset is 22.5mm in the X direction & 0 in the Y direction. Also included is a fan nozzle and mount using the other two mounting screws on the carriage. Mount is designed for a standard 50x15mm blower fan and has 6mm of height adjustment.
Statistics
Likes
91
Downloads
0