Computer Power Button
Description
Do you have to reach under your desk to turn-on your desktop computer? You need this button! This cool looking button with interchangeable top cover with breathing lighting effect has been designed to be cheap, easy to print, easy to assemble and easy to upgrade. Project Difficulty: Easy ----- Total Print Time: ~3.5 Hours ----- Total Project Built Time: ~5 Hours ----- You have two options: 1)Connect the LED through Arduino (recommended) This gives you the breathing effect and enables future updates 2)Connect the LED directly to the motherboard Follow the project for future modifications/upgrades ----------------------------------------------------------------------------- ------------------------------------------------------------------------------- How it Works? ----- The 3D printed button can be placed anywhere on your desk where it is convenient for you to reach. It can turn your computer on and off (or hibernate/stand-by depending on the settings on your windows). There is an LED inside the button which illuminates around the button with a breathing effect while your computer is on. --------------------------------------------------------------------------------------------------------- Planned upgrades (depending on your response and support): --------------------------------------------------------------------------------------------------------- -Add Bluetooth module to wirelessly turn on the PC -Turn on your PC with your voice (Google Home) -Upgrade the LED to RGB -Adding other functions? If you have any questions/suggestions please write it in the comment section. Cheers! ------------------------------------------------------------------------------------------------------------- Disclaimer: ----- "Bad Fuse" is not responsible for burned motherboards! Please proceed only if you have basic hardware knowledge!
Statistics
Likes
93
Downloads
0