Brushless motor c-clip washer set
Description
I'm always loosing my c-clips when flying, and together with them also the little washers. They seem very hard to obtain, so I decided to 3d-print some and test if they work. It appears they work rather well, and an extra benefit is that you can print them in any thickness to make your bell fit the stator very tight (at least vertically). Here's a template with washers for 3mm shafts in 6 different thicknesses. Take them for the next ripping. If you loose your washer, all you need to do is try them until one fits perfectly, they're super cheap to print. They can be separated with fingers, though some wire cutters will probably work better. If you need a different size, please use the onshape parametric model here: http://tiny.cc/xiqp4y
Statistics
Likes
7
Downloads
0