Cable Pass Through Brush Plate
Description
This is a cable pass-through with a brush barrier. Helps restrict air flow so you can have proper cooling in your cabinet. I could't find a similar unit that was finished on both sides. This is made to sandwich a 1/8 to 3/16" cabinet backer panel. You will need some brush. I used: TANIS Brush MB250436: I got on Ebay: https://www.tanisbrush.com/catalog/nylon-fill-galvanized-backing/MB250436 Self tapping screws are required. I used #4 x 1/2" Flat head screws You will have to cut the brush to length depth... as in actually trimming the bristles (See photos)
Statistics
Likes
15
Downloads
0