Stairway lighting
Description
OpenSCAD files are available on my github repository: https://github.com/bytezar/stairway-lighting To mount this light I used two screws 3.5 mm and 12 mm length. As a light I used one segment from led strip 12V (5 cm). I soldered wire and glued it to printed part. I used such connectors: https://www.aliexpress.com/item/620Pcs-Dupont-Connector-2-54mm-Dupont-Cable-Jumper-Wire-Pin-Header-Housing-Kit-Male-Crimp-Pins/32884911697.html I printed it from petg.
Statistics
Likes
44
Downloads
0