Nema 17 Motor Cycloidal 5:1 Gear Ratio
Description
Nema 17 Motor Cycloidal 5:1 Gear Ratio 9mm thick when put together, requires 5x M3 bolts 15+mm and 1x M3 nut. Print on 100% infill and ultra fine resolution (0.1mm or better ideally), supports on. You will probably have to do some light sanding to ensure every surface is smooth and free of errors as there is only 0.2mm tolerance throughout. You may even want to add a few drops of oil to the inner mechanism if you intend it to have heavy use. License: Creative Commons, Attribution, Non-Commercial, No Derivatives, All-Rights-Reserved Like what you see? Consider donating! PayPal.Me/ricktress
Statistics
Likes
8
Downloads
0