Frsky R9mm Antenna Mount +Tube
Description
3 files Antenna tube Antenna cap Standoff Mount -Tube Setting PetG plastic 4.5 retraction distance 0.1.5 layer height 30 mm/s 220C print temp. 70C Bed -Antenna Cap+Standoff Mount TPU 4.5 retraction distance 0.2 layer height 30 mm/s 210C print temp. 70C Bed there is a hole in the tube to feed the antenna's, i used a small piece of tape on the heat shrink where the two meet, i can put cutoffs for the mount to cover the hole if people are interested, just leave a comment
Statistics
Likes
4
Downloads
0