CR-10 Stand Alone Modification
Description
**Credit for Original Model of CR-10 Printer (https://www.dropbox.com/s/h1xo4tg836g06id/CR-10-ASSY.STP?dl=0) goes to Kevin Rowe (https://www.thingiverse.com/WickedFog/about) and Dušan Pešić. Thank you both so much!** This is a collection of parts that allow the conversion of the standard Creality CR-10 3D Printer into a standalone device, with no separate control box. This Thing contains the SolidWorks, Assembly, .STL, and gcode Files for the following pieces: - A power supply holder that mounts to the 3D Printer's Frame - A PCB Holder that mounts to the base of the 3D Printer, below the build plate - A model cable manager that securely and easily attaches to the 3D Printer's frame - A model SD to Micro-SD ribbon cable mount (Link to the referenced model below with other relevant links) to allow for quick access and file importation that mounts easily and securely to the 3D Printer's frame - A custom designed display mount in three pieces - The Front, which securely holds the display and control knob - The Back, which screws into the front to allow for protection of the display board - The Hinge, which attaches with both the front piece and the 3D Printer's Frame in order to allow for maneuverability and ease of application - An alternate Display Front and Display Hinge for those who are unable to make other modifications to the CR-10 frame. (*See below*) - Four Printer Leg Parts for raising the Printer to the necessary height. - Replacement feet parts in case of missing original pieces - A fully constructed Assembly showing how all parts are designed to be applied onto the CR-10 as well as all subassemblies for: - The Display Mount - All three printable files as well as a model for the CR-10 display - The Alternate Display Mount - All three printable files as well as a model for the CR-10 display - The Power Supply Mount - Printable file as well as a model for the CR-10 Power Supply - The Board Mount - Printable file as well as models for the PCB and the Mosfet - The SD-Reader Mount - Printable file as well as simple size model for SD Reader (Link to the referenced model below with other relevant links) THIS MODIFICATION REQUIRES THE DISMANTLEMENT OF THE CR-10 CONTROL BOX. DO NOT DO THIS WITHOUT TAKING PROPER SAFETY PRECAUTIONS OR QUALIFIED SUPERVISION. THIS CONVERSION WAS DESIGNED TO BE USED WITH THE “CR-10 Style 3D Printer Z Reinforcement Kit” BY ‘ZYLtech’ (Link included below). ALTERNATE INSTRUCTIONS FOR INSTALLATION HAVE NOT BEEN FULLY TESTED, BUT ARE LISTED AT THE BOTTOM OF THE PAGE. This conversion *REQUIRES*: An SD to Micro-SD converter with Ribbon Cable AND/OR a Micro-SD to Micro-SD extender with Ribbon Cable, a set of Gauge Cable extensions and corresponding Crimp Spade Terminals, a Flush-Cutter, Colored Sharpies AND/OR Colored Tape, a Phillips-Head Screwdriver, a Flat-Head Screwdriver, a varied collection of Allen-Keys, a small wrench or Needle-Nose Pliers, 13 M5x12 Hex Socket Head Cap Screws, 2 M5x8 Hex Socket Head Cap Screws, 15 M5 T-Nuts, 2 M4x12 Hex Socket Head Cap Screws, 11 M3x12 Hex Socket Head Cap Screws, 6 M3x20 Hex Socket Head Cap Screws, 17 M3 Nuts, 1 M6x70mm Hex Bolt, and 1 M6 Nut. *LINKS FOR ALL NECESSARY PARTS AND TOOLS* ‘CR-10 Style 3D Printer Z Reinforcement Kit’ by ZYLtech: http://www.zyltech.com/cr-10-style-3d-printer-z-reinforcement-kit/ Gauge Cable Extensions and Corresponding Crimp Spade Terminals: https://www.amazon.com/TOMALL-6-3mm-Female-Connector-Terminal/dp/B07GFH96TX/ref=sr_1_14?keywords=16+awg+wire+with+spade+terminals&qid=1558114302&s=gateway&sr=8-14 https://www.amazon.com/Baomain-Insulated-Connector-Electrical-Terminal/dp/B01B1DL4OA/ref=sr_1_1?keywords=16+awg+spade+terminals&qid=1558114431&s=gateway&sr=8-1 Allen Key Set: https://www.amazon.com/TEKTON-Wrench-Metric-13-Piece-25272/dp/B00I5THFTC/ref=sr_1_3?keywords=Hex%2Bkey%2Bmetric%2Bset&qid=1556992098&s=gateway&sr=8-3&th=1 Hex Screw and Nut Set: https://www.amazon.com/dp/B073335YHQ/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B073335YHQ&pd_rd_w=8cK73&pf_rd_p=8a8f3917-7900-4ce8-ad90-adf0d53c0985&pd_rd_wg=ggeke&pf_rd_r=2GHYG6VPRWS08HP13DWK&pd_rd_r=c20b28c7-7b42-11e9-825e-f767610a7f33 M5 T-Nuts: https://www.amazon.com/PZRT-50-Pack-Nickel-plated-Aluminum-Accessories/dp/B079FNZN71/ref=sr_1_3?keywords=m5+tnuts&qid=1556992629&s=gateway&sr=8-3 M6x70mm Hex Bolt and M6 Nut: https://www.amazon.com/uxcell-Thread-Stainless-Screws-Fastener/dp/B07JF5WSJK/ref=sr_1_4?keywords=m6x70mm%2Bhex%2Bbolt&qid=1557326837&s=gateway&sr=8-4&th=1 https://www.amazon.com/Marine-Stainless-Metric-Coarse-Thread/dp/B07NX13BRV/ref=sr_1_8?keywords=m6+metric+nut&qid=1557326861&s=gateway&sr=8-8 SD to Micro-SD converter with a ribbon cable: https://www.amazon.com/LANMU-Extension-Flexible-Monoprice-Raspberry/dp/B01D9JIUU0/ref=sr_1_fkmr2_1?Keywords=SD+to+Micro-SD+converter+with+Ribbon+Cable&qid=1556839542&s=electronics&sr=1-1-fkmr2 Micro-SD to Micro-SD extension with a ribbon cable: https://www.amazon.com/LANMU-Extension-Flexible-Monoprice-Raspberry/dp/B01D9J8KQE/ref=sr_1_fkmr2_1?Keywords=SD%2Bto%2BMicro-SD%2Bconverter%2Bwith%2BRibbon%2BCable&qid=1556839542&s=electronics&sr=1-1-fkmr2&th=1 Longer Ribbon Cable for connecting the Display to the PCB: https://www.amazon.com/gp/product/B01IS1N5KY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Recommended Alternate Mosfet: (This is the one we used and designed for, however, the included Mosfet works perfectly as well) https://www.amazon.com/Printer-FYSETC-Current-Creator-CR-10-2/dp/B07C4V3DCB/ref=sr_1_9?Keywords=cr-10+mosfet&qid=1556804891&s=industrial&sr=1-9
Statistics
Likes
64
Downloads
0