Audi R8 Bezel
Description
Bezel for the Audi R8. Should be printed in ABS, because a car can get too hot inside for PLA. This print is to be fitted with the: "Autostereo 180 x 103mm Universal Double DIN Installation Slot Metal Car Stereo Radio Mounting Frame 2DIN Universal Car Radio Adapter In-Dash Mounting Frame Complete Fitting Kit" Which is available at amazon.com The DIN kit is a generic kit. If Autostereo does not have it, the exact kit is also sold under other brands. Make sure the dimensions are exact when purchasing the DIN kit Apr 29-2019 update: The new file has 1mm larger opening. It will work nicely with vinyl wraps ETC. I also removed the badge cutout, because most of you do not want it. Please note. This whole print depends on exactly the DIN kit I recommended. It is important as you can see on the print there isn't a lot of material left on the bezel for the frame. Autostereo is only one distributor of this kit. there are many others. I would say, this is a very common low price DIN kit. Version 2 now published: I made the DIN opening 1mm wider and taller, because after vinyl wrapping the opening, the frame fit was too tight and difficult to fit. You can print this any direction you want, but maybe for better results flip it 180 deg. May 1 -2019 version. * Added RHD bezel. I cannot test this one, but keep me posted if it fits right. * Modified the print, so it prints straight up instead of the back being on top. * Removed badge recess. May 5, 2019 version. Kit completely redesigned. Head unit now tilts 3 degrees. Much better fit and less glare from head unit in the sun. Large head units will no clear the bottom inside the console. * Face now has soft curvature to it, making it flow and fit better * Added .8mm fillets, so the part can also be CNC machined properly * Added .step CNC files too May 9, 2019 version: * Moved opening 2mm sideways * Minor contour changes making a tighter fit with less gaps in some areas
Statistics
Likes
10
Downloads
0