Prusa i3 X Carriage Adapter for Bulldog XL Extruder
Description
An X Carriage Adapter For The Bulldog Xl And Prusa I3 (Aurora Design). ___ It Is Specially Designed So That The E3D Fan Shroud Can Still Fit In The Upright Position. Note: I Mirrored The Bulldog Xl By Following A Youtube Tutorial. ___ The Servo I'M Using Is The Tgy-1440A. (Sub-Micro Servo) Http://Hobbyking.Com/Hobbyking/Store/__7475__Turnigy_1440A_Servo_4_4G_0_8Kg_10Sec_V2_.Html If You Don'T Want To Use A Servo For The Z Probe I Have Also Attached An Alternative Which Utilizes A Rubber Band Snap Mechanism. The Idea Was Given To Me By A Mate. Http://Www.Thingiverse.Com/Aistaca/About The Switch Is A Dm3 Micro Switch From Jaycar. Http://Www.Jaycar.Com.Au/Productview.Asp?Id=Sm1036 ___ Tolerances Have Already Been Accounted For So That The Bulldog Xl Can Sit Nicely In The Mounting Grove. ___ Most Of The Screws Used Are M3 X 15Mm. ___ Optional Active Cooling. ___ No Supports Needed!! ___ This Actually Increased My Printer Speed By 1,200%. ___ Note: The Stepper Cooling Fan That Can Be Seen In Some Of The Images Can Be Found Here: Http://Www.Thingiverse.Com/Thing:35436
Statistics
Likes
125
Downloads
0