LEGO DUPLO Conveyorbelt Anti-Slip Repair
Description
# What this is: If you own a Lego Duplo Conveyor Belt (Type 2 on 4 x 4 Base with Blue Sides and Black Belt), chances are, that you are unable to use it anymore, because the rubber went stiff and slippery. Luckily, the conveyorbelt has screws and can be disassembled. With this Thing, you will be able to replace the guide roller and the drive roll. The Parts i designed have prongs, so they are able to grip the slippery rubber. They will also increase tension. Print in PETG or ABS if you can, but PLA will probably work too. It might break after some use, but is easier to print. If you have trouble with the prongs printing well, decrease the speed / feed rate to about 50% or 70%. Layerheight: 0.2mm will be fine. *Bed Adhesion: use at least a 7mm Brim*
Statistics
Likes
2
Downloads
0