FPV Racing Gate Pegging Clamp
Description
I wanted some Whoop race gates. I used two pieces of 15mm x 13mm x 1M pipe insulation gaffer taped together and then 3D printed feet to be zip tied onto the pipe ends to allow the gates to be easily pegged out. There are two versions, the larger one that takes two zip ties but takes about 75 mins to print and a cut down version that works but allows the gate to wobble a bit but only takes 18 mins to print. The mini one can be used to suspend gates from lines tied to bushes and such like.
Statistics
Likes
4
Downloads
0