FTM-400 to RAM Mount Adapter
Description
This is an adapter to connect the [FTM-400](https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=106&encProdID=227201D29C822AEFF8482F3367495319&DivisionID=65&isArchived=0) control head to the [RAM Mount](https://www.rammount.com) Ball Adapter with AMPS Plate (RAM-B-347U). Use this adapter to with any of the RAM Mount "B" size hardware. The center hole is sized to allow the use of the mounting screw that comes with the radio. The hex shapes are sized to take M4 nuts. I found a lock washer between the control head and the adapter prevented the control head from moving on the mount. I designed this thing using Fusion 360. The full design is available [here](https://a360.co/2v6vPwU). Additional hardware required: 4x M4 nut 4x M4x12 hex cap screw Optional hardware: 1x Lock Washer The RAM Mount hardware I used: 1x RAM® Diamond Ball Base (RAM-B-238U) 1x RAM® Double Socket Arm (RAM-B-201U-A) 1x RAM® Ball Adapter with AMPS Plate (RAM-B-347U)
Statistics
Likes
14
Downloads
0