Comm Antenna Drill Template
Description
This is a drill template for a Comant bent whip comm antenna. All the holes should fit a #40 drill to be the pilot, then enlarge the holes for the screws and center hole for clearance. You should use this template first to make a support plate to check the size and hole spacing for your antenna. The test piece could then be used as a doubler plate. See my youtube channel for information on how and where i mounted my antenna. Jim Note: I printed this at 150% on the Z axis and NO top or bottom layer, but you could print the top and bottom if you wanted, it works without and is a bit faster to print without. Video: https://youtu.be/2rN2R_9myRE
Statistics
Likes
0
Downloads
0