DJI Inspire 1 Clone (alternative canopy)
Description
Work in progress... (place holder, will add more soon) Remix of CDRSkulls epic Inspire drone. It started out as just a canopy design and has now morphed into this . . . The original design asked that users go buy the original DJI canopy and print CDR's Inspire guts/internals. Searching for a 3D printable DJI canopy proved problematic. Designs existed but many lacked the features and more importantly the structural integrity needed. To avoid any patent/copyright issues, this design is an alternative design I came up with that adds many of the features i wanted. I do not believe this will work with the original DJI inspire, but if anyone has one for more to test or design off of . . i'd be more than happy to take the drone off your hands ;) -Structurally sound (thicker wall structure) -Beefed up the bottom plate, significantly -Support for front gimbal -Gimbal tested is a HAKRC gimbal . . . but believe other gimbals could be used -Ability to add 2 batteries (in parallel) for higher capacity (6S design) -Rear Hardpoints for VTX -Canopy has grid of hard points to add additional sensors/gear -Canopy has ability to add dedicated forward facing camera (for camera switching) -Dedicated (High) GPS Mount -Supports 15.5in blades More to come . . .
Statistics
Likes
7
Downloads
0