Fairphone 2 cover with integrated card holder
Description
Printing info: Brim used for adhesion. Printed in upright position (slicer used Cura 4.0), nozzle 240, bed 40. Support is needed for top part of the cardholder which overhangs. Support blocking can be applied on the inside of bottom part of the phone cover. Printed with 1.75 mm transparant PETG from 123-d.nl. Fairphone 2 cover mesh based on the cover design from https://www.thingiverse.com/unwohlpol and cardholder design from https://www.thingiverse.com/oldfrog. Cardholder can hold up to 5 cards and a banknote. Changes to cover: Top was stretched with 1 mm and bottom with 2mm to make it fit perfectly. Changes to cardholder: Removed the print on the top of the cover so you can add your own decoration. Removed the bottom of the housing, resized the box and placed on the back of the bottom part fairphone cover. Removed the top left corner so the top cover can still slide onto the phone. 16-5-2019: updated the bottom stl, had a version problem
Statistics
Likes
3
Downloads
0