Panel Wire Grommet With Slotted Opening - 1/2 inch thick, 3/4 inch long - with end cap nuts
Description
I recently made an antenna connector passthrough panel for my window. I needed a 1/2" hole on one side of the panel and wanted to make a grommet that I could slide cables into that would stay put inside the hole. I ran my antenna wires through the slot that is cut out and stuffed some foam inside with the wires to create a weather seal from the outside. It's for a 1/2" hole through a panel that is 3/4" thick. UPDATE: I have added two files as an update. I tried to make the same type of setup, but with a bolt split in half for more strength.
Statistics
Likes
14
Downloads
0