Parametric Anet A8 & AM8 Bowden MODULAR X-Carriage
Description
Probably not the cleanest openSCAD files you can find here, but it gets the job done ! Some changes and improvements compared to the original things : - clone or legit "throat" mount, adapts to your setup :) - the beltholder holes are now aligned - the extruder mount holes are now aligned as well - you can choose whether you want a round base / and round extruder mount (or the regular square ones) - you can choose which type of screws you want to mount the extruder with (m3 or m4 sizes) - there's a minor cut on the front part that prints without support to make more space for custom fanducts - there's also a fan cut option to get a bit more space on the left side of the carriage - top zipties slots offsets (up/down) - the "probe mounts" holes are fully customisable (leave only 1 hole, move it, replace it by zipties slots) - hex shims provided to keep the nuts in place Still entirely compatible with the original mod and mods, unless you remove all mount holes. Regarding marlin extruder offsets, I didn't have to modify anything from the default/stock anet a8 config files except : #define X_MIN_POS -13 #define Y_MIN_POS 0 (YMMV, but this should tell your printer where's the nozzle, without modifying the "buildplate length" or any wierd fancy options) Thanks to the original author and the "clone compatible" remix author, I used both of their designs before having to re-print/remake this to fit my needs) (Thanks to anyone looking at the scad code for any corrections, it's a pretty (working) mess :) )
Statistics
Likes
10
Downloads
0