IKEA Lack Enclosure Creality Ender 3 / RGB LED Lights
Description
IKEA Lack Enclosure Creality Ender 3 / RGB LED Lights Hello I wanted to introduce you my model of my case for the Ender 3. I've looked for a stylish solution for a 3D printer housing, unfortunately, I've found nothing what was illuminated. That's why I modeled myself one. The case is very resistant if you print it with 60% infill and use Petg best.I have a RGB light strip in each cube installed and the cables in the cavity of the table leg shifted so they were invisible . The control was installed under the table where you could switch it on and off with a switch. The light strips in the printing room were also laid over the cavity of the table leg. The housing consists of 3x Ikea lack tables from the last one only the tabletop needs. I have chosen extra such a design that the table has a larger contact surface and if then still below filament is put down one has still more stability and much less vibrations. I also insulated the housing with insulation material on the inside walls and an MDF and acrylic plate so that so little heat and noise escapes. You can get the handle for the housing here : https://www.thingiverse.com/thing:36465 The project is not finished yet and there will be some more files like for example a filament roll holder, filament dispenser, tool tray, fire extinguisher holder is in progress.
Statistics
Likes
106
Downloads
0