Direct Drive BMG/Bowden Hypercube Evolution MGN12 & MGN15
Description
Joined the best designs to create a compact and clean Rail System. Was remixed some of the parts to adapt it to my preferences. Used MGN12H for Y Carriage and MGN15H for the X. The main objective was to create a solid rail system because the Linear Shafts were not giving to me the quality that I was looking for. Rail Dimensions: 2 x MGN12H 405 mm 1 x MGN15H 470 mm Will be needed 10X M3 Screws and M3 Insert nut (m3x5x5) to fix the MGH12 rails to 3030 Profile. For those who want a Chain like mine you can find here: http://eunsetee.com/Bfx5 (15x20 mm + TypeB + Semi-enclosed) For those who don't want a Chain, you have alternative mount support. Added.STEP and .F3D files of Extruder Setup. You can find all the original designs on the Remixes. ****************************************************************************************** - UPDATE: 27/08/20 Added Direct Drive adapter. Can be adapt to the actual design by using BMG and Pancake Stepper Motor. IMPORTANT: You can use the same Heat Dissipator and Bowden Pneumatic! The Teflon tube that goes from the BMG to HeatBreak has about 70mm. Additional Component List: - 2X M3 Screws 18mm (Adaptor fix) - 3X M3 Screws 38mm (BMG fix) For any questions feel free to ask.
Statistics
Likes
173
Downloads
0