Traxxas Trx-4 Stand
Description
This is a stand that i designed for any Traxxas TRX-4 using the stock 95mm shocks (or shorter). This stand allows you to lift the vehicle off the wheels for storage. By lifting the vehicle off the wheels it helps prevent flat spots of the tires and worn foam inserts. Also this design allows the suspension to be at full droop resulting in minimizing the wear of the springs. This stand would have 8 screws total. The holes are extra long so variety of lengths could work. I used M3x16 cap screws to hold it together. I did run a tap down the holes and doing so will help minimize Z-axis weakness. I have 2 images the first is an isometric view of the stand. The second images shows one potential layout of the parts in Cura for a 220x220 print surface. Infill %, perimeter #s, nozzle size and speed will affect print time. This was just the default settings. This design is for personal use only. There are cuts on all side of text that is very close but not identical to logos and therefore should not be made and sold. You will need: 1 driver's side 1 passanger's side 2 cross members 8 screws (i used m3x16 caps) 1 tool to install screws Optional: m3x0.5 tap paint to further customize stand
Statistics
Likes
393
Downloads
0