Longboard Steering Stick System
Description
A little project I built by myself for university. This is a prototype, drivable but not safe! If you want to make one, you may have to reconstruct or modify some parts because I designed it especially for this "globe" longboard. In addition to the printed parts you need: 2x steel plates with additional cutouts 1x 12mm riserpad for the rear trunk 1x steering stick of a kickboard (no matter if fold-able or not) 1x aluminium or metal tube (bicycle handlebar), outer diameter 22mm 2x metal strips 60x15x1mm with two 6,5mm holes in a distance of 40mm Screws and nuts: 1x M10 allen bolt, head is grinded down to a heigth of 3mm 1x M10 self-locking nut 4x M6 screws to hold the metal strips 4x M6 distance nuts 30mm height 4x M6 countersunk screws long 4x M6 countersunk screws short 4x M6 nuts
Statistics
Likes
20
Downloads
0