Case for TI mmWave Radar, Raspberry pi and Xiaomi Power Bank
Description
Case for TI mmWave Radar, Raspberry pi 3 and Xiaomi Power Bank ==================================================== ###The purpose of this piece is to aggregate this 3 components in a way to make the mmWave Radar as portable as it is possible. ##Case mount for: - Millimeter wave radar from Texas Instruments - mmWave AWR1x4x sensor; - Raspberry Pi 3; - Xiaomi Mi Power Bank 2C Model No.: PLM06ZM. ##Radar Board mounting details: The radar board must be a Texas Instruments AWR1642, AWR1443, IWR1642 or IWR1443 boost board. The recommended screws are the 10mm length, M4 screws (the ones supplied with the board are good enough). ##Other devices mounting details: The remaining devices - raspberry pi 3 and power bank - are simply placed inside the holes behind the radar. ####Added part - Mount for raspberry pi3 and power bank only: The part named *case.stl* is the same as the previous one, but without the radar mount holes.
Statistics
Likes
4
Downloads
0