Filament Spool Holder - Bearings and custom width for FLsun QQ - 6mm bearings
Description
Remixed a little the original design as bearings I used (I think this kind of bearing, being grooved, has a better stability) have a thinner diameter. Holed the bearing supports and pushed in steel metal pieces. I bought those bearing overdose Amazon.it (here is the link: https://www.amazon.it/dp/B06XJTHP7Y/ref=cm_sw_r_cp_apip_QCMjIOYv1yygT) but you can find them easily on other stores. Had to print the big screw with 4 custom supports around it (in the shape of a cross, 40 degrees) as the first time it detached at 97% and the last 5 mm printed badly. Here the link to Cura file with custom support for the screw and all the modifications I've made: https://www.dropbox.com/s/8sekpn81ayey6vy/CFFFP_Filament-Spool-Mount_FLSUN_QQ.3mf?dl=0 (ps, pay attention to temperature as I used a infused PLA filament for robustness that prints good at 240°)
Statistics
Likes
43
Downloads
0